Filter
Top Products
244
Communication Commands
File Transmission (/S)
Function
This function transmits a file on the execution-side machine to the communication partner. If the
specified destination directory does not exist on the partner side, it will be automatically created.
Starting method
int argc = number of parameter arguments
char* argv = { "fl", "/S[Option]", "transmission file pathname"
[,"transmission file pathname"],
“
destination directory name"}
DoFlink(argc, argv)
Options
Option Description
O (Overwrite) Specification to forced overwrite a read-only file
R
(Recursive call)
Transfers all files under the directory specified by the
transmission file pathname.
Q (Quiet) Non-display of the FLINK output message
H
(HT-HT communication)
Used to perform communication between two handy terminals
(execute the partner-side FLINK with idle start).
Transmission file pathname
Specify the file on the transmission source by its full pathname.
A wild card can be used for the file name.
Multiple transmission file pathnames can be specified.
Destination directory name
Specify the storage directory name on the communication partner.
The last input parameter is assumed to be the storage destination directory name.
The directory name must include the drive name.
Enter " " as the delimiter of the directory name.
Example
"d: " (Specification of the root directory)
"d: test 12 " (Specification of the sub-directory)
"d: test" (Incorrect specification)