Filter
Top Products
90
Steps 1–5 are the same on master and slave cameras.
1
On the [53] tab, select [Communication
settings].
2
Select [Network settings].
Once you have set [Communication func] to
[Enable], you can select [Network settings].
3
Set [Communication mode] to
[Disconnect].
Once you have set [Communication mode] to
[Disconnect], you can select [Sync time between
cameras].
4
Select [Sync time between cameras].
X Select [OK] on the next screen displayed, shown
below.
5
Select [Wireless].
After selecting [Wireless], select [OK].
Synchronizing the Time
COPY