Filter
Top Products
110
Responding to Error Messages
Are you following the correct procedure to establish the connection with slave
cameras?
X Operate slave cameras by following the correct instructions (p.66, 67).
Are the slave cameras too far from the master camera?
X Bring the slave cameras closer to the master camera.
Are you following the correct procedure to establish the connection with master
camera?
X Operate the master camera by following the correct instructions (p.66, 67).
Is the master camera too far from the slave cameras?
X Bring the master camera closer to the slave cameras.
Are you following the correct procedure to establish a connection between the
master and slave cameras?
X Operate the master and slave cameras by following the correct instructions (p.90, 91).
Are the master and slave cameras too far apart?
X Bring the master and slave cameras closer together.
Is the transmitter attached correctly?
X Make sure the transmitter is securely inserted in the camera (p.10).
Another problem has occurred, identified with an error number other than 11 to 82.
X Turn the camera’s power switch off and on.
71: Cannot connect to slave camera
72: Cannot connect to master camera
73: Could not synchronize the time
82: Wireless File Transmitter not connected
91: Other error
COPY