Filter
Top Products
Creating the DHCP Scope: IPNC Setup - Page 13
7. You can now configure the lease time for the address. Setting too large will
mean you will lose the use of addresses if the client machine is inactive for
long periods of time, too short and you will generate unnecessary traffic
renewing the address. The default 8 days is fine. Click Next
8. The wizard gives the option to configure the most common DHCP options.
Select Yes and click Next
9. Enter the address of the gateway, and click Add. You can enter several.
Click Next when all are entered.
10. Enter the DNS domain, e.g. savilltech.com and the DNS server addresses.
Click Next .
11. Enter the WINS Server Name and IP Address and click Add. Click Next
12. You will then be asked if you wish to activate the scope.
Select No and click Next
13. Click Finish to the Wizard
The new scope will now be listed and the status as Inactive.
INDeX 4602 IP Telephone Installation Manual Page 13
38DHB0002UKCQ – Issue 2 (11/06/2003) Creating the DHCP Scope: