Filter
Top Products
Page 10 - IPNC Setup Installation Procedure
8. Press the 1 or 0 button to turn 802.1Q on or off respectively.
The display is updated to show the current status of 802.1Q.
Press the # button to continue the procedure without changing the displayed
status of 802.1Q.
The following text is displayed left-justified at the top of the display:
VLAN ID=dddd
New=_
where dddd is the value of the 802.1 VLAN ID.
9. Enter a valid value (between 0 and 4095) for the new value of the 802.1
VLAN ID.
The following message is displayed:
Save new values?
*=no #=yes
10. Press the # button to save the new values you have entered.
The following message is displayed:
New values?
Being saved
Once the new values are stored, the telephone is reset.
If a new boot program is downloaded from the TFTP server after you enter
static addressing information, you will need to re-enter your static addressing
information.
Page 10 - IPNC Setup INDeX 4602 IP Telephone Installation Manual
Installation Procedure 38DHB0002UKCQ – Issue 2 (11/06/2003)