Filter
Top Products
46
Press the OK soft key. MONITOR appears, and you hear sounds in the room
where the handset is installed.
To turn off the Room Monitor, press the END soft key or [ ] on either handset or
return the handset to the cradle.
If you want to prevent other handsets from monitoring the station, press the MENU soft
key on the handset. Select the HANDSET SETUP menu, and then the ROOM MONITOR
submenu. Select OFF and press the OK soft key.
Note:
This feature only works when both handsets are within range of the base.
If the party is out of range, UNAVAILABLE appears in the display and the operation will be canceled.
While a pair of handsets is in Room/Baby Monitoring, they cannot be used to make or receive calls; however,
other handsets can still make and receive calls normally.
Tone Dialing Switch Over
If your telephone company requires pulse dialing, you can switch to tone dialing after the call connects. This feature
is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers, telephone
prescription rells, customer support menus, etc. If your phone is set to pulse dialing, make your call normally. Once
your call connects, press [
tone
] on the handset. Any digits you enter from then on will be sent as tone dialing. When
this call ends, the phone automatically returns to pulse dialing.
3)
4)
•
•
•
To which unit?
Handset #2
Handset #3
BACK DELETE OK
To which unit?
Handset #2
Handset #3
BACK DELETE OK
Monitoring
｣｣
Handset #2
END
Monitoring
｣｣
Handset #2
END