Filter
Top Products
43
Using the DirectLink Feature
A pair of handsets (or two pairs of handsets at one time) can function as two-way radios. This fea-
ture is called DirectLink and will not interfere with the base’s ability to make or receive telephone
calls while in use. To activate, you must set both handsets to the DirectLink feature. While using
this feature, these two handsets will not be able to make or receive normal phone calls until this
operation is canceled; however, other handsets will function normally.
Note: If the party is out of range, NO SIGNAL appears in the display and the operation will be
canceled.
Press the MENU soft key. Select DIRECTLINK MODE menu.
Press the OK soft key. The display shows TO ENTER DIRECTLINK MODE PRESS
[ENTER].
Press the ENTER soft key. You will hear a conrmation tone, and DIRECTLINK MODE
COMPLETE appears in the display.
1)
2)
3)
To enter
DirectLink mode
press [ENTER]
BACK DELETE ENTER
To enter
DirectLink mode
press [ENTER]
BACK DELETE ENTER