Filter
Top Products
28
To put intercom and external calls on hold
When you have two calls on the same line, you
can put them both on hold:
• Press the ➔ button until display shows HOLD
CALLS.
• Press the ✔ button. Display flashes , INT
and shows CALLS HELD flashing.
• Press the
TALK button to speak to your
external caller or press the
INTERCOM button
to speak to your intercom caller.
To transfer a call
You can transfer an external call to any other
handset registered to the same base station.
When you are on an external call:
• Press the
INTERCOM button. Your caller is
put on hold and will hear a series of beeps.
• Press the number of the handset to which you
want the call transferred. Display shows INT
CALL and the handset number you are calling.
The other handset rings.
• When your call is answered, you can tell them
there is a call for them.
• Press the ➔ button until the display shows
TRANSFER.
• Press the ✔ button and the call is transferred.
If the other handset does not answer:
• Press the
INTERCOM button to reconnect to
your external caller. If the other handset has
not answered after 30 seconds, you will be
reconnected to your external caller
automatically.
Please note: If you place the handset back on
the base station, and the other handset does not
answer, your handset will ring after 30 seconds.
When you answer you will be reconnected to
the original caller.
Intercom
Intercom
Intercom
14t Edition ~ 15t Sept ’98