Filter
Top Products
14
14t Edition ~ 15t Sept ’98
To adjust the handset ringer volume
The handset ringer can be set to HI or LOW.
• Press the ➔ button until display shows SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ✔ button. Display shows KEYTONES.
• Press the ➔ button until the display shows
RING VOL.
• Press the ✔ button. Display shows the current
setting HI (or LOW).
• Press the ➔ to change the setting. Display
shows LOW (or HI).
• Press the ✔ button. A beep confirms that the
change has been made.
To adjust the handset ringer melody
You can select from six different ringer
melodies.
• Press the ➔ button until the display shows
SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ✔ button. Display shows KEYTONES.
• Press the ➔ button until the display shows
MELODIES.
• Press the ✔ button. Display shows the
current setting A (or B,C,D,E,F). The
displayed setting is played.
• Press the ➔ to change the setting. Display
shows the next melody option. The melody is
played.
• Press the ✔ button when you want to select
a melody. A beep confirms that the change
has been made.
If more than one handset is registered to the
base it can be useful to select different melodies
for each handset.
To adjust the ringer volume in the base
station
You can switch between HI, LOW and OFF.
• Press the ➔ button until the display shows
SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ➔ button. Display shows BASE.
• Press the ✔ button. Display shows SECURITY
PIN.
• Press the ➔ button until the display shows
RING VOL.
• Press the ✔ button. Display shows and plays
the current setting HI (or LOW, OFF).
• Press the ➔ to change the setting. Display
shows the next option and the ringer sounds.
• Press the ✔ button. A beep confirms that the
change has been made.