Filter
Top Products
50
Display
To switch the new event backlight ash on/off
When new event pop-ups are displayed, for example new
missed calls received and the handset is on the charger, the
screen will also ash, or pulse. The default setting is On.
1 Press Menu, scroll down to Settings and press Select.
2 Scroll down to Display and press Select.
3 Scroll down to Flashing and press Select.
4 Scroll up or down to highlight On or Off and press Select
to conrm.
To change the handset name
The handset name appears on the standby screen. If you
have more than one handset it can be useful to change
the handset name, for example to ‘Kitchen’ or ‘Paul’.
The default setting is Hub Phone.
1 Press Menu, scroll down to Settings and press Select.
2 Scroll down to Handset name and press Select.
3 Use the keypad to enter a name (up to 12 characters) for
the handset and press Select to conrm. Press Clear to
delete unwanted characters.
Alarm and time settings
You can use your Hub Phone as an alarm clock. The current
time (shown in the handset display) is set automatically by
your Hub.
To set an alarm on/off
1 Press Menu, scroll down to Settings and press Select.
2 Scroll down to Time settings and press Select.
3 Alarm is highlighted. Press Select.