Filter
Top Products
14
4 When ‘Register handset to your Home Hub’ appears on
the handset screen, press ‘OK’.
Your phone should be on, but if it isn’t, press and hold
down the red
button. If the phone doesn’t turn on,
check that the batteries are the right way round or see
page 62.
If registration fails, the screen will display Register
handset to your Home Hub again, and you’ll have to
try again.
5 Press the Wireless Association button on the side
of your Hub. The Phone and Wireless lights will
start ashing.
Note: if the Hub 2.0 is in power save mode, all the
lights will remain off throughout the Hub Phone
set up proccess, apart from the the orange power
light. However, you should still be able to succesfully
complete the Phone set up as long as you have set
already up BT Broadband Talk.
OK
Register handset
to your Home Hub
Find HandsetReset to
Defaults
Wireless
Association
Restart
1
2