Filter
Top Products
54
Freestyle 650 – Edition 2 – 30.03.06 – 7335
If you experience any problems, please call the Helpline on 0870 605 8047
When the base is located, you will hear a confirmation
tone and
PIN?
will be displayed.
7. Enter the base PIN code and press . You hear a
tone to confirm you have entered the correct code and
the handset returns to idle mode.
Once registered, you will hear a confirmation tone and
the next available handset number is allocated and
shown in the display.
Selecting a base to use
If your handset has been registered to more than one
base you can select which one it uses.
1. Press .
2. Press or until
REGISTER
is displayed then press
.
3. Press or until
SELECT BASE
is displayed then
press .
4. All bases that your handset is registered to will be
displayed, e.g.
BASE 1234
.
The base that you are currently registered to will flash.
5. Enter the number of the base you want to use.
Or
Using additional bases
The default PIN code is 0000.
If registration is unsuccessful, after
1 minute, the handset will display
the list of registered bases and you
can try again or select another
base to use.
If you are in an environment where
there is a lot of electrical
interference you may experience
difficulty registering to a base.