Filter
Top Products
Answer delay
Answer delay sets the number of times
your Freestyle 65 will ring before the
answer machine picks up your call and
starts playing the outgoing message.
The default setting is for the answering
machine to answer after 6 rings. You
can change this setting to between 2-9
rings.
18
Freestyle 65 User Guide ~ 5th Edition ~ 5th April ’02 ~ 3950
To switch the answering
machine ON/OFF
Press and release the
ANSWER ON/OFF button to
switch ON or OFF.
If you hear “Answer on, your
outgoing message is....”
the answering machine is
switched on and is ready to
answer incoming calls and
record any messages, unless
Answer Only is selected which
is an advisory announcement
only, so that the machine will
not record an incoming
message.
The display on the base unit
shows the number of messages
stored in the memory.
If you hear “Answer off”
the answering machine is
switched off.
The display on the base unit
will flash between a dash and
the number of messages saved
in the memory.
To adjust the base unit
loudspeaker volume
The loudspeaker volume
ranges from 0-9 plus H, where
0 is Off and H is the maximum
level. The default level is 5.
Press VOL + on the base to
increase the volume.
Press VOL - on the base to
decrease the volume.
If you adjust the volume when
the answering machine is not
being used, a beep sounds at
each press. When the volume
reaches its highest or lowest
levels two beeps will sound.