Filter
Top Products
29
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Help
No display appears
The batteries may be flat or dead.
Recharge or replace the batteries.
No dial tone
Is the telephone line cord plugged into the phone socket?
Check that the base is connected to the mains power and
switched on.
You cannot link up with the base
Is the display flashing icon?
The mains power cable may not be connected at the base or
switched on.
Are you in range of the base?
Move closer to the base.
The batteries could be low or flat
Recharge or replace the batteries.
No ring on the handset
The ringer volume may be set too low for you. To adjust
the volume, see page 26.
Check that the base is plugged into the phone socket and
the mains power and that the mains power is switched on.
Buzzing noise on my radio, TV, computer or hearing aid
Sometimes your BT Freelance XD 100 can interfere with
other electrical equipment if it is placed too close.
It is recommended that you place your BT Freelance XD
100 at least one metre away from such appliances to avoid
any risk of interference.