BT Twin Cordless Telephone User Manual


 
27
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Using the BT Freelance XD
100 Twin additional handset
The BT Freelance XD 100 is NOT GAP compatible,
therefore, it cannot be registered to any other DECT
telephones. However, if you have purchased the BT
Freelance XD 100 Twin you will have the BT Freelance XD
100 additional handset. Please note that this is the only
handset that can be used with the main BT Freelance XD
100 base. With the BT Freelance XD 100 Twin you can
make internal calls and transfer external calls between the
two BT Freelance XD 100 handsets.
The BT Freelance XD 100 additional handset comes
pre-registered to the main BT Freelance XD 100 base.
It is supplied with its own charger and must be charged
continuously for 16 hours before you can use it. Please see
Setting Up on page 15 if you have not already done this.
Internal calls
You can make internal calls between your BT Freelance XD
100 Twin handsets.
To make an internal call
Press the INT button.
The other BT Freelance XD 100 handset will ring
and
INT
will be shown on the display to indicate
that the call is internal. To answer the call they
should press the TALK button.
To end the call, press the TALK button.
Int