Filter
Top Products
Diverse 4010 Executive ~ 9th Edition ~ 17th July ~ 3662
60
To set the pause length
You can set the length of the
pause that is automatically
inserted after you press the
GREEN PHONE button and
before the telephone number
is sent from your phone.
Press the
OK options button.
Enter the code
8 9 1 6.
Enter the pause length:
1 = 1 second, 2 = 3 seconds,
3 = 7 seconds, 4 = 3.2 seconds.
Press the
OK options button
to confirm the setting.
Press the
RED PHONE button
until you reach the idle display.
OK
OK
OK
OK
OK
To switch temporarily from
pulse to tone dialling
If your switchboard uses pulse
dialling but tone dialling is
required during a call, you can
switch the call to tone dialling.
During your call:
Press the Menu options button.
Press the
DOWN navigation
button until the display shows
Temp.Tone
.
Press the
OK options button.
Tone dialling is set for the
duration of the call.
Press the
DOWN navigation
button until the display shows
Add. Features
.
Press the
OK options button.
Press the
DOWN navigation
button until the display shows
TBR
.
Press the
OK options button.
Press the
UP or DOWN
navigation button to select the
flash time you want. Options
are 80ms. 100ms, 120ms,
180ms, 250ms, 300ms, 600ms.
Press the
OK options button
to confirm the setting.
Press the
RED PHONE button
until you reach the idle display.
Menu
OK
GENERAL INFORMATION