Filter
Top Products
Diverse 4010 Executive ~ 9th Edition ~ 17th July ~ 3662
48
To display and dial the
emergency number
The emergency number is
saved in the base station so
any handset can dial it, even
if it barred from all other
external calls.
Press the
GREEN PHONE
button.
Press the
Emer Call options
button. Display shows the
emergency numbers you have
set.
Press the
UP or DOWN
navigation button to select the
emergency number you want.
Press the OK options button
to dial.
Press the
OK options button.
Enter the PIN (original setting
=
0000
).
Press the OK options button.
Enter the emergency number
you want – up to 16 digits.
If an emergency number is
already set it is shown, you
can change it.
Press the
Menu options button.
Display shows
Save Entry
.
Press the OK options button to
confirm the setting.
Press the
RED PHONE button
until you reach the idle display.
OK
Emer
Call
Menu
OK
OK
OK
To reset the base
You can restore a base station
to its factory settings. Resetting
the base will not affect the
system PIN or handset
registration.
Press the
Menu options button.
Press the DOWN navigation
button until the display shows
Base Settings
.
Press the OK options button.
Press the
DOWN navigation
button until the display shows
Base Reset
.
Press the OK options button.
Enter the PIN (original setting
=
0000
.)
Press the
OK options button.
Press the Yes options button
to confirm reset.
The settings after a reset will be:
Calls list deleted
Join call deleted
Handset names INT 1- INT 6
Alarm clock switched off
Dialling mode tone
Flash time 100ms
Prefix deleted
Pause after prefix 3secs
SMS provider Pre-set number
number switched on
SMS incoming
and outgoing lists deleted
Voice dialling deleted
Press the RED PHONE button
until you reach the idle display.
Menu
OK
OK
OK
Yes
BASE SETTINGS