To re-set to TONE dialling
• Press the STO button then the
# button.
• Press the 1 button.
• Enter the current system code
(default 0000).
• Press the LNR button.
• Press the buttons 0, 3, 7.
• Press the STO button to set tone
dialling.
To set Time Break Recall with
Tone dialling
• Press the STO button.
• Press the # button.
• Press the 1 button.
• Enter the current system code
(default 0000).
• Press the LNR button.
• Press the buttons 0, 3, 7.
• Press the STO button.
STO
#
1
LNR
To set to Earth Recall with Tone
dialling
• Press the STO button.
• Press the # button.
• Press the 1 button.
• Enter the current system code
(default 0000).
• Press the LNR button.
• Press the buttons 0, 3, 6.
• Press the STO button.
To insert an access code
The handset must be switched ON.
• Press the STO button.
• Press the # button.
• Press the 0 button.
• Enter the system code (default
0000). Each digit you enter
erases one dash on the display.
• Press the
LNR
button. Display
shows
A
–-
–-
–-
.
• Enter the access code (for
example
9). If you want to enter
additional access codes, press
LNR again, followed by the next
code, and so on.
• Press the STO button to confirm.
STO
#
1
LNR
STO
#
1
LNR
STO
#
0
LNR
Switchboard compatibility
49