BT Diverse 2015 Cordless Telephone User Manual


 
If the symbol flashes
continuously, it means the handset is
either out of range or is not registered
with the base station. To register,
follow the steps on page 51. All
additional handsets you purchase will
need to be individually registered with
the base station before they will work
with the Diverse 2015.
The symbol may also flash after a
power failure. Provided the handset
has been registered with the base,
the symbol will stop flashing after a
while indicating the handset has
automatically re-registered to the base
station. If it continues to flash, re-
register the handset to the base station
– see page 51. The display may also
flash if the day and time have not been
set, see page 29.
Getting the most out of your
batteries
Avoid replacing the handset on the
base station between calls. It is best to
keep the handset off the base for a few
hours at a time.
Please note: If you go out of range
of a base station for a long time while
your handset is switched ON, it may
take more than 20 minutes to ‘find’ the
base station again when you come
back within range. However, by simply
switching the handset OFF for a
moment, then ON again, it will find
the base station within a few seconds.
Setting up
9
Battery low warning
An LCD on the handset display shows
the current charging level. When the
batteries are almost flat a beep sounds
and the display shows the empty
battery symbol. Displays showing that
charging is in progress are listed below:
Batteries fully charged
Batteries at 66%
Batteries at 33%
Batteries empty