Filter
Top Products
26
Additional handset functions
Paging a handset
If you want to hail a handset or find out where
it is is, you can page it from the base station.
To page a handset from the base station
1 At the base station, press Function then
Transfer. The base station display will show
HANDSET NUMBER.
2 On the keypad, enter the handset number
(
1-4) that you want to contact. If you want to
contact all the handsets at the same time,
press the ✱ button. The display will show
FIND HANDSET.
3 The base station will beep, and the
handset(s) you are contacting will ring.
4 At the handset being contacted, the display
will show a flashing
INTERCOM icon and the
handset will ring.
A
B
C
2
eg
✱
or