Filter
Top Products
Alternatively you can use the ▲ or ▼ button
to scroll through the two-digit numbers.
3 Enter the telephone number you want to
store using the keypad. Press the
Clr button
to delete incorrectly entered digits.
4 Then press OK to confirm the entry. The
handset beeps and displays the stored
number. The handset returns to standby
after about 20 or 30 seconds, or you can
use the
Clr button to return to standby
immediately.
To change a stored number
1 Press the ▲ or the ▼ button.
2 Enter the two-digit memory number or scroll
through the stored numbers until you reach
the phone number you require.
17
Using your handset
If you are on a PABX exchange (switchboard) you
may need to have a pause in the stored number. Use
the R button for this. The pause is shown on the
display as .