Filter
Top Products
Synergy 4000 – Edition 3 – 15.05.06 – 7372
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Location
You need to place your BT Synergy 4000 charger within
2 metres of a mains power socket so that the cable
will reach.
Make sure it is at least 1 metre away from other
electrical appliances to avoid interference.
Your BT Synergy 4000 works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it as
high as possible ensures the best signal.
Connect the charger to the mains power
1. Push the mains power cord into the power socket on the
underside of the charger until you hear it click into place.
Plug the other end into the mains power wall socket.
WARNING
Do not place your BT Synergy
4000 in the bathroom or other
humid areas.
Handset range
The BT Synergy 4000 has a range
of 300 metres outdoors when there
is a clear line of sight between the
base and handset. Any obstruction
between the base and handset will
reduce the range significantly.
With the base indoors and handset
either indoors or outdoors, the
range will normally be up to
50 metres. Thick stone walls
can severely affect the range.
Signal strength
The icon on your handset
indicates when you are in range.
When you move out of range of
the base, the out of range tone will
sound every minute. This tone is
repeated until you move back into
range.
IMPORTANT
The charger must be plugged into
the mains power socket at all
times. Only use the power cable
supplied with the product.
Power adaptor cable
Getting started
2