Filter
Top Products
4. Press to save the option selected.
5. Repeat the actions described in point three for any other
settings you wish to change.
6. Press and hold to exit the set-up mode and return to
stand-by.
Ringer tone
Choose from three ring tones – R1, R2, R3.
LCD contrast
Select between 5 contrast levels for the display screen.
Amplify lock
Your BT Relate 3000 will remember the last selected
volume level for incoming or outgoing calls when amplify
lock is switched on.
You can switch between ON and OFF for this setting.
When OFF is selected your phone will revert to the factory
setting after use. These are:
Handset: Normal volume (setting one)
Handsfree: Mid-volume (setting three)
Headset: Normal volume (setting one)
Personalise your phone 23
BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346
WARNING
If Amplify lock is set to on, the
volume may be very loud. All users of
your BT Relate 3000 should be made
aware when the amplify lock is set
to on.
6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 23