Filter
Top Products
Setting your preferences
Using the button located between the (M2) and
(M3) buttons, you can adjust some of the settings on
your BT Relate 3000 to suit your personal preferences.
1. Press . Display shows WHERE?. Now press .
The display shows SETUP MODE then HOLD STORE TO EXIT.
2. Press repeatedly to display (in the following order):
Ringer tone – R1, R2, R3
LCD contrast – 1,2,3,4,5
Amplify lock is on/off
VIP ringer is on/off
Voice prompt is off/on
Beep tone is on/off
Amplify is incoming/outgoing
Key lock is on/off
Memory 3 is not/is recall
1571 Detection on/off
Time – 12:00AM
3. When the setting you want to personalise is displayed,
press to switch between the options. The option
that is flashing will be the one that is stored.
Personalise your phone22
BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346
The selected option will be shown
flashing.
For setting the time, see the
instructions on page 7.
M1
M2
M3
Holding the button down will
save any settings changed and exit
the set-up mode.
6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 22