BT 2100 Telephone User Manual


 
49Help
BT Relate 2100 (BT SMS Server) – Edition 5 – 23.04.04 – 5799
Other functions and services available from the SMS service
By sending the following commands to the BT text self administration facility you can
control functions and capabilities in your SMS phone and the way messages are handled.
Press the button. Press to write SMS. Type in the following commands
(depending upon what you wish to do) and then press . Press again and enter
00000. Press to send.
This will enable you to opt out from receiving voice text messages.
Turns off the opt out option.
Turns on permanent voice text message delivery to your phone.
This means all incoming text is delivered as voice text.
Turns off permanent voice text message delivery.
If you are sending a message from a fixed line phone to another fixed line phone.
Forces a message sent to be delivered as voice text even though the
recipient may have an SMS enabled phone and usually receives written text.
This command is inserted at the start of the message and applies only to
that message, e.g. “Hello I will be home late”.
If you are sending a message from a fixed line phone and require a status report.
Will allow a status report to be sent back to you when you have sent a
message to confirm delivery. Place at the start of your text
message. Write the message and send it. You will receive a reply text back
to your phone giving the status report for that message.
0
0
3
D
E
F
3
D
E
F
2
A
B
C
2
A
B
C
1
1
S
M
S
5799 Relate 2100 (BT Server4) 26/4/04 9:57 am Page 49