Filter
Top Products
3. Display shows current PIN code (default 000) and you
hear,
“Please enter new security code”. Enter a 3-digit PIN
code of your choice and select the
OK option.
4. Your PIN code is announced.
5. Press
and hold to exit and return to standby.
Switch your answering machine on remotely
If you forget to switch your answering machine on, you
can do it remotely from another phone.
1. Dial your telephone number and let it ring. After 20 rings
you will hear your outgoing message.
2. Press
*, then enter your security code.
3. Press
7 within 8 seconds. You will hear “Answer On” and
your answering machine will switch on ready to answer
incoming calls.
To check for messages
1. Dial your phone number. When you hear your outgoing
message, press
*. You will hear, “Please enter your security
code”.
2. Enter your 3 digit code. You will hear, “You have ‘n’ new
messages” and they will be played back. If you have no
48 Answering machine
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Time saver
When you ring in to access your
messages remotely, if your
answering machine is set to time
saver and you have new messages
it will answer after 2 rings, if you
do not have any new messages, it
will answer after 6 rings. This
means you can hang up after 3
rings knowing you have no new
messages, saving you time and the
cost of the call.
You cannot use this feature if you
have BT Answer 1571 or Call
Minder active as the call will be
intercepted before the 20 rings.
Your handset will automatically
return to standby if no button is
pressed for 8 seconds or more.
If you have any new messages they
will be played after you have
entered your security PIN code.