Filter
Top Products
Dial mode
1. Press or until
Base Settings
is displayed then
select the
OK option.
2. Press or until
Dial mode
is displayed then select
the
OK option.
3. Press or to highlight the dial mode you want.
4. Select the
OK option. You will hear a confirmation tone.
5. Press
and hold to exit and return to standby.
Restore default settings
You can restore your BT Mango to its default (original)
settings. Please note this will delete your phonebook,
redial and calls list.
1. Press or until
Base Settings
is displayed then
select the
OK option.
2. Press or until
Restore settings
is displayed
then select the
OK option.
3.
PIN Code?
is displayed. Enter your 4 digit PIN code and
select the
OK option. After a few seconds the handset
power switches off and the base beeps. The handset will
then switch itself back on and show the standby display.
35Base settings
Mango – Issue 2 – Edition 2 – 28.06.06 – 7677
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Your BT Mango is pre-set to Tone
dialling. The dial mode options are
Tone (Time Break/Earth) or Pulse
(Earth).