Filter
Top Products
You can store up to three numbers using the one-touch
buttons.
Each stored phone number can be up to 32 digits long.
Store a number in the one-touch memory
1. Remove the one-touch memory label as the store button
is located underneath. Lift the handset or press .
2. Press then press the one-touch button, you will hear
a button press confirmation tone throughout the process.
3. Enter the number you want to store.
4. Press . You hear a longer confirmation beep.
The number is stored.
Dial a number in the one-touch memory
1. Lift the handset or press .
2. Press the one-touch button. The number stored for that
button is dialled.
Edit a number in the one-touch memory
1. To change a one-touch dial number, simply store a new
one. This will overwrite any existing stored number.
Handsfree
Store
Store
Handsfree
One-touch memory buttons
15
BT Big Button 100 – Issue 2 – Edition 1 – 10.02.06 – 6361
You may hear an exchange
announcement, during or
after the storing sequence,
suggesting that there has
been an error, or that you
should redial the number.
This is normal and does not
mean that the storing
sequence is in error.
You can make a note of your
one-touch numbers on the
label above the store button.
There is also an enlarged
label at the back of this
guide if you prefer.