Filter
Top Products
7
BT Falcon UG – Issue 2 – Edition 02 – 12.09.07 – 8375
If you experience any problems, please call the Helpline on 0800 169 1146 or go to www.bt.com/business/broadbandvoice
4. Power
Plug the power lead into the socket labelled DC underneath the telephone. Plug the other end
into the mains socket and switch on.
If your network supports power over Ethernet (PoE) your BT Falcon can be powered from a powered
Ethernet switch via the Ethernet cable. In this case the mains power adapter is not required.
5. Connecting to the network
Ensure your rout
er has power and an internet connection. Connect the Ethernet cable into the
socket labelled LAN underneath the telephone and plug the other end into the Ethernet port of
the router or Ethernet switch as appropriate.
Getting started
Ethernet cable from
Broadband Router
or Ethernet switch
Power lead
You can connect a network device to the Ethernet port, labelled PC, of your BT Falcon
8375 Falcon UG Issue 2 [2] 12/9/07 15:30 Page 7