Filter
Top Products
7
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
Battery performance
In ideal conditions, a fully charged
battery should give up to 12 hours
talk time or 120 hours standby time
on a single charge.
Note that new batteries do not reach
full capacity until they have been in
normal use for several days.
The charge capacity of rechargeable
batteries will reduce with time as
they wear out, giving the handset
less talk/standby time. Eventually
they will need to be replaced. New
rechargeable batteries are available
from the BT Inspire 1500 Helpline
on 0800 218 2182*.
After charging your handset for the
first time, subsequent charging time
is about 6–8 hours a day depending
on usage. Batteries and handset may
become warm during charging.
This is normal.
Using your BT Inspire 1500 on a
Broadband line?
If this product is to be used on a
broadband line then you must ensure
that it is connected via an ADSL
microfilter. Using this product on
a Broadband line without an ADSL
microfilter may cause problems with
this product and your Broadband
service.
Additional BT ADSL microfilters can
be purchased from www.shop.bt.com
3. Place the handset on the base to charge for at least 24 hours.
4. When the batteries are fully charged, plug the end of the
telephone line cord into the telephone wall socket.
BT Inspire 1500 multiple pack owners only
Location
You need to place your BT Inspire 1500 charger close enough to a
mains power socket so that the cable will reach.
Setting up the charger
1. Plug the power adaptor cable (item code 048610) into the
underside of the charger and secure the cable behind the
retaining clip.
Plug the other end into the mains wall socket and switch the
power on.
2. Remove the protective film from the handset screen and
activate the batteries by pulling the plastic tab away from the
back of the handset.
3. Place the handset on the charger and charge for at least
24 hours.
Mains power cable