BT 1500 Cordless Telephone User Manual


 
7Getting started
Talk/Standby time
In ideal conditions, the handset
batteries should give about 10
hours talk time or 100 hours
standby on a single charge. The
base must remain plugged in to
the mains and switched on at all
times.
Note that new batteries do not
reach full capacity until they have
been in normal use for several
days.
Battery symbols
– Battery fully charged
– Battery half charged
– Battery low
Battery low warning
If the battery charge becomes low
during a call you will hear a
warning beep every minute
(provided the battery warning tone
is set to on, see page 29). If the
battery runs out you will be cut off.
You will need to recharge the
handset before using it again.
During charging, the (battery) icon
will scroll in the display.
BT Studio 1500 – Edition 3 – 27.07.04 – 5876
3. Install the 2 x AAA rechargeable batteries supplied.
Then slide the battery compartment cover into place.
With batteries installed the display will show:
The icon will flash while the handset searches for
the base.
4. Place the handset in the base to charge, the red
charging light comes on and the icon begins
scrolling.
STUDIO 1