Filter
Top Products
BT Studio 1500 – Edition 3 – 27.07.04 – 5876
Problem Possible cause
No display The batteries may be flat or dead.
Recharge or replace the batteries, see page 7.
No dial tone Is the telephone line cord plugged into the telephone
wall socket?
Check that the base station is connected to the mains
power and switched on.
You cannot link up Is the icon flashing in the display?
with the base station
The mains power cable may not be connected at the
base or switched on.
Are you in range of the base? Move closer to the base.
The batteries could be low or flat.
Recharge or replace the batteries.
Many common problems are caused by the telephone and power cables being incorrectly
connected, not connected at all, or the power being turned off.
Please check that your BT Studio 1500 has been correctly set up, see page 6, before
ringing the BT Studio 1500 Helpline.
Help56