Filter
Top Products
BT Studio 1500 – Edition 3 – 27.07.04 – 5876
IMPORTANT
You must choose a handset that is
GAP compatible to use with your
BT Studio 1500.
If you purchase a new handset to use with your
BT Studio 1500 it will have to be registered to the base.
You will need to do this before you can use it.
If you have purchased a BT Studio 1500 Twin the 2nd
handset comes pre-registered to the base.
Only 2 handsets can be registered to your BT Studio 1500
base at any time.
With 2 handsets, you can make internal calls, page
handsets and transfer external calls between your
handsets.
Registering a new GAP compatible handset to your
BT Studio 1500 base
At the new handset:
1. Follow the new handset’s user guide to set the handset
in registration mode.
At the BT Studio 1500 base:
1. Press and hold the base button for at least 10
seconds, until you hear the validation tone (two beeps),
then release the button.
Page
Using additional handsets
If the handset does not locate the
base, the handset will return to the
previous menu. Try to register
again by using a different available
base number. Ensure that you are
in close vicinity of the base.
50