Filter
Top Products
NOTE: Depending on number
of messages optioned during
installation (switch 7), the
(available message numbers
will read 1 through 9, or 01
through 99.
To record on another message number, press the
FUNC key until the desired message number appears.
Press the RUN button and begin speaking into the
handset, microphone, or press play on the tape player.
SURE ?
mm:ss
When recording is complete, press the FUNC key.
The display shows the amount of time
used for the message:
TIME
0:30
DONE
IDLE
Repeat steps 2 through 6 to record other messages.
4
5
6
7
NOTE: If the message number
selected has been
pre-recorded, a messaged will
display "SURE?" Press "RUN"
again to append to the existing
message.
During recording, the display
will show the amount of
memory remaining for the unit
in minutes and seconds.
NOTE: While recording a
message, pressing RUN will
pause the recording. Press
RUN again to continue.
8