Filter
Top Products
13
External Booster Amp
An external booster amplifier (Bogen Model BPA60) can be connected when the application requires more than 35 watts.
Using an external amplifier disconnects the internal 35W amp of the MCP35A. To install, connect a RCA cable from the
MCP35A LINE OUT jack to the Hi-Z input jack on the rear panel of the BPA60 amplifier. Connect another cable from the
25V output terminals of the booster amplifier to a 1/4” stereo phono plug wired as shown in the figure below. Insert this
into the jack labeled 25V BAL INPUT on the MCP35A.