Filter
Top Products
5
The battery will last for about 300 hrs on standby and much longer if the V12 is switched off
in between uses.
13. Can I use my V12 with my computer for VOIP applications?
Yes, you can connect the V12 to a PC or Mac that supports the Bluetooth Headset or
Handsfree profile. To do this you need to have Bluetooth enabled in your computer by using
a Bluetooth USB Dongle or having a computer that has inbuilt Bluetooth.
Depending on the Bluetooth software installed, the connection process will be different.
Simply put the V12 into Pairing mode, then activate a search using your computer’s
Bluetooth Software. When the V12 is displayed, enter the Passkey “0000” then start the
Headset/Handsfree service by connecting the headset.
Note: Microsoft’s® Windows® XP generic Bluetooth driver does not support audio, but
your computer may be using a different driver that does support it
To check which Bluetooth driver you have, go to: Control Panel > Sounds, Speech and
Audio Devices > Sounds and Audio Devices.
Click on the hardware tab and find the “Bluetooth Audio” in the Devices. Left click on the
“Bluetooth Audio” to make it highlighted. Below you can see which manufacturers device
driver is linked to the “Bluetooth Audio”. Check your computer manufacturers’ website for
any software updates. Go to our website for more details on using the V12 for VOIP.
14. Do I need to pair the devices every time I use them together?
No, the pairing process is required only once for each phone, unless the devices are
deleted.