Filter
Top Products
14
X5 Stereo Bluetooth Headset
Using the Headset to Make a Call
z Make sure Headset and mobile phone are connected and microphone
plugged into USB port of the X5 Headset.
z To make a call, dial from the mobile phone and when the dial tone is
heard, click MFB once to switch over to Headset. For mobile phones
supporting Handsfree profile, you can dial from mobile phone without
having to click MFB.
z To end the call, press the MFB once.
Notes: For some phones, the ON/OFF button is used to end the call.
For Bluetooth phones that support Handsfree Profile, clicking the MFB
in a long manner will activate the phone to redial to the last number
received or called. For redialing, the procedures may differ from one
device to another. For some phones, clicking the MFB in a long manner
will first activate the phone to display the list of the last numbers
received or called. For others, clicking the MFB in a long manner will
redial to the last number received or called directly. And again on others
it will activate Voice dialing.
Using the Headset to Answer a Call
z To be able to answer a call, the Headset and mobile phone must be
connected and the microphone plugged into USB port of Headset.
z On an incoming call, bell will ring from Headset and mobile phone. Call
can be answered from phone or from Headset by pressing the MFB
once.
z For mobile phones supporting only headset profile, the ON/OFF button
may be used to answer incoming call.
z To disconnect the call, press MFB once. For mobile phones supporting
only headset profile, the ON/OFF button is used to disconnect.
z If the other party ends the call first, Headset will automatically enter into
standby mode without the user having to press ON/OFF button to end
the call.