Filter
Top Products
10
LINE SHARE 120H
3. Installation
The Line Share 120H is a single-line device that can be installed on any type
of modular or non-modular system that consists of one or more lines, with
one or more phones. A modular system consists of phone cables that can be
connected and disconnected from a telephone device. A non-modular system
consists of cables that are hard-wired to the telephone device and cannot be
disconnected from the equipment. A telephone installer may be required to
install the Line Share 120H on a non-modular system.
NOTE
Many offices have a KSU or PBX phone system. The Line Share 120H
works with either of these systems. Simply follow the appropriate
installation instructions provided in Section 3.7.
3.1 Unpacking the Line Share 120H
When you open the Line Share 120H box for the first time, inspect the
contents. You should have the following items:
• (1) Line Share 120H
• (1) AC power adapter
• (1) telephone line cord
• This user manual
If any of these items are missing or damaged, call Black Box immediately at
(724)-746-5500.