Filter
Top Products
15
CHAPTER 3: Installation
5. To connect a fax machine, plug the RJ-11 end of a telephone line cord
into the FAX/MODEM port on the Line Share 120H.
Set your fax to answer on 1 ring.
6. To connect a telephone device such as a computer modem, in lieu of a
fax machine, plug the RJ-11 end of a telephone line cord into the
FAX/MODEM port on the Line Share 120H.
Set the modem to answer on 1 ring.
NOTE
The Line Share 120H has an automatic TAD Transfer feature (see Section
4.4 for more information on the TAD port). To disable this feature,
connect your answering machine to the PHONE port of the Line Share
120H and connect your phone to the answering machine.
LINE-IN
1
TAD
2
PHONE
3
FAX/
MODEM
4
12VAC
Figure 3-4. Configuration for TAD Transfer Feature Disabled.
Connect this line cord to the port
labeled “Telephone Set” on the
answering machine.
Connect this line cord to the port
labeled “Telephone Line” on the
answering machine.