Filter
Top Products
Making and answering calls
To switch the handset ON or OFF
Press and hold the CLEAR button for 2~3 seconds to switch the handset ON /OFF.
To make a call
1.
Key in the telephone number (If you make a mistake, press CLEAR button to clear
digits from the display. To clear all digits, press and hold CLEAR button.)
2.
Press the CALL button.
3.
Or you also can dial the stored number through UP/DOWN button.
Note: You can dial the number after you press the CALL button if you need, but you won't
be able to correct any mistakes if you do it in this way.
When you dial the outside line access digit (e.g. 9) then the telephone number, press and hold
the "#" button about 2 seconds for a pause.
To redial a call
In standby mode, press and hold the CALL button to enter the dial list, and press the
UP/DOWN button to scroll through the number you want to dial, then press the CALL
button to redial.
To answer a call
When the handset and base unit ring, press the CALL button to answer a call, and the
symbol or appears in the display.
When the AUTO TALK is turned on, you can simply answer the call by lifting the handset
from the base unit (see AUTO TALK part).
To end a call
Press the END button to end a call.
Earpiece volume
During a call, to adjust the volume of the earpiece:
Press the UP or DOWN button to change the volume.
Muting the mouthpiece
During a call, if you want the person on the other hand end cannot hear you; press
MUTE once to mute the mouthpiece;
While the mouthpiece is muted, you cannot press any number key to send digits down
the line; Press MUTE key again to get back to the call.
Phone Book
Up to 30 records could be stored in each handset's Phone Book. Each record can store up to
20 digits, and names of up to 8 characters could be stored with the number. In standby mode,
press UP/DOWN button to show phonebook list. There are two ways to enter phonebook.
In standby mode, press PHONEBOOK button to enter phonebook; or through MENU and
UP/DOWN button to enter phonebook.