Filter
Top Products
In standby mode, press
to show phonebook list;
Press during
programming to move
through the menu. Press
during a call to change
the volume in the
earpiece.
Clear / On-Off /End button
Press to turn the
speakerphone ON/OFF
Press to begin, answer
and end a telephone call.
The Handset and Base Unit
Press to enter menu mode
and enter sub-menu. Use
the key "
" to lock or
unlock the keypad.
Press during a call to mute
the microphone
MENU/ Mute button
UP/DOWN button
S
p
eaker
p
hone button
PHONEBOOK/OK/Recall button
In standby mode, press to enter
phonebook mode.
Press to confirm selection.
You can activate Recall function if
your phone is connected to a PABX,
or if you use Select Services.
Press to transfer an outside call to
another phone.
Press and hold (2-3 seconds) to switch
the handset on and off. Press during
programming to go back to the
previous option, or to clear digits one
by one from the display.
Press to end the call.
IN USE li
g
ht
The IN USE light comes on when you
have a connection to the telephone line.
HANDSET LOCATOR button
Press this to make the handset ring,
if you cannot remember where you put it.
Press it again to stop the handset ringing.
INT button
Press to make an intercom call (if you
have more than one handset)
Before you can use the handset to make
calls for the first time, you will need to
fit and fully charge the battery for 15
hours.
Call button
Press to begin and
answer the call