Filter
Top Products
Symptoms
The display shows a flashing ..
The ringing signal does not work.
Redialling does not work.
Caller ID and other special functions
do not work.
Possible cause
The batteries are low.
The ringing signal is switched off.
• The prefix is not stored
(switchboard).
• A pause between 1st and 2nd
part of the phone number has
not been stored.
• You have not subscribed to the
Caller ID service.
• The batteries have not been
inserted, have been incorrectly
inserted, or are dead.
Correction
Insert new batteries.
Switch the ringing signal on.
• See Setup menu, Switchboard.
• See Using the Pause button.
• Contact your telephone company
to subscribe.
• Check that the batteries have
been correctly inserted and are
not dead.
TROUBLE SHOOTING