Filter
Top Products
11
10
MAKE A TEST CALL
To place a test call
press the talk button
on the headset.
Important: If your
telephone has a
receive volume
control ensure it is
set no higher than
mid-range–too high
a setting could cause
audio problems.
COMPATIBILITY WITH YOUR TELEPHONE
It is very important that the configuration dial (4) is positioned
correctly. Audio problems may be experienced if this is
incorrectly set. If you cannot hear a dial tone through your
headset, turn the configuration dial until you obtain it. Then
dial a co-worker and while speaking, turn the configuration
dial through the 4 positions. Select the position that provides
the best sound quality for both you and your co-worker.
During this call you should also adjust the Listen and Speak
Volume and Listen Tone as described next. Once set, the
configuration dial will not require any further adjustment.
Continue configuration setup by making a test call to a
friend or associate using the key pad on your telephone.
Adjust your telephone configuration dial on the base to
position 3 for the following telephones: 2420, 4610SW, 4620,
4620SW, 4621SW, 4622SW, 4625SW, 4630SW, 5420, 5610
and 5620. Adjust the configuration dial to position 1 for the
following telephones: 2410, 5410, 6416 D+M and 6424
D+M. For other telephones, adjust the configuration dial to
any position where you hear a tone.
SELECT YOUR HEADSET WEARING OPTION
S
M
L
Headset with Tri-Pod Optional Uniband Headset
Earloop
Neckband Optional