Filter
Top Products
7
TEST
The Test feature allows you to test the lights and display on your telephone.
To test the lights and display on your telephone
1. With the headset off, press and hold down (or
).
Lights go on in columns, and all the display segments fill in.
2. To end test, release (or ).
Lights return to normal operation.
Note: If the lights or the display segments do not respond during the test,
see your system manager.
TRANSFER
The Transfer feature allows you to transfer a call from your telephone to
another extension or outside number.
To send the present call to another extension
1. While on a call, press (or
). [dial tone]
2. Dial the number to which the call is to be transferred. [ringing tone]
3. Remain on the line and announce the call.
(If the line is busy or if there is no answer, you can return to the held
call by pressing its call appearance button.)
4. Press (or
) again to complete the transfer.
Note: To cancel an attempted transfer, press the original call appearance. If
your system has auto-hold activated, use to cancel a transfer so
that the potential transfer recipient is not left on hold.
Getting Messages
MESSAGE
Your Message light goes on when a caller has left a message for you.
Note: You may also be able to use the Message Retrieval display feature.
For directions on retrieving your messages, see your system manager.
Trnsfr
Trnsfr
Trnsfr
Trnsfr
Drop