Filter
Top Products
VPNremote for 4600 Series IP Telephone Installation and Deployment
Avaya Inc. - Proprietary
Use pursuant to Company Instructions.
16
Depending on the speed of your network and existing firmware version on phone it may
take up to 5 minutes. The VPNphone is ready for deployment when you see following
message on the phone display
VPN Configuration Changed
Do you wish to restart ?
YES NO
This message remains only for 25 seconds after which phone will restart itself hence you
might end up seeing this message on the phone display.
VPN Configuration Error
Press EDIT to modify VPN
Press Disable to Disable VPN
EDIT DISABLE
This error message means that some information required for setting up the IPsec tunnel
is missing. In this case VPNremote phone user must enter the following by pressing the
softkey corresponding to <EDIT> label:
1. User Name.
2. Password.
3. Presahred Key if using PSK with Xauth method for setting up the tunnel.
At this stage the VPNphone is ready for deploying at remote location. Refer to XXX for
instructions that you must provide to end user for deploying VPNphone at remote
location.
7 Batch Installing VPNphone
The procedure described in section 6 to 7 for installing VPN firmware on 4600 series IP
telephone requires manually setting each phone’s GROUP to 876 hence does not scale
well when installing firmware on hundreds of 4600 series IP telephone. To efficiently
deploy many VPNphones follow the instructions below: