Avaya 4600 Telephone User Manual


 
DSS Key Functions Page 22
DSS Key Functions
Overview
You can program many of the phone’s functions to a DSS key. You can
also program dialing digits or user, group and park slot numbers.
4406D+, 4606D+ and TransTalk
®
MDW 9040 Telephone:
The DSS keys on the 4406D+, 4606D+ and TransTalk
®
MDW 9040 can
only be programmed through the Manager Application. Contact your
System Administrator.
4450 DSS module
The buttons of the 4450 DSS module are programmed via the station to
which the 4450 is connected. A user can program a button on the 4450
in the same manner that they would a button on their phone. In the
following sections, the “DSS key” can either be a button on the actual
station, or a button on the 4450 DSS module.
Storing Abbreviated Dialing Under a DSS Key
Each button can be programmed with the number that you would normally
dial. Typically you would use this for an external number or a system or
personal short code, consult your System Administrator for a list of
shortcodes.
To store digits under a DSS key
1. Press Menu
.
2. Using the
and keys, display and then select Prog.
3. Press the required DSS key.
4. Enter the number to store. Note: You can store partial strings as after
pressing the DSS key you can dial further digits, e.g. you could store an
international dial prefix for all calls to a particular country.
5. Select Done.
6. Select another DSS key or press Exit
.
or
1. Press Menu
.
2. Using the
and keys, display and then select Admin
3. Use the
and keys to select AD.
4. Enter the number to store. Note: You can store partial strings as after
pressing the DSS key you can dial further digits, e.g. you could store an
international dial prefix for all calls to a particular country.
5. Press the required DSS key.
6. Select Done.
7. Select another DSS key or press Exit
.
4400, 4600, 6400 & TransTalk MDW 9040 Telephones Page 22
IP Office 40DHB0002USAL - Issue 6 (04/25/2003)