Filter
Top Products
54 Avaya 3720 DECT Telephone - User Guide 02/2009
1. Select Owner ID.
2. Enter identity.
3. Press Save to save the setting.
In Charger
Redirect Calls when placed in Charger
Calls can be redirected to another extension when the cordless telephone is placed in a
charger. Then it will not ring when receiving a call. The function is automatically cancelled when
the telephone is removed from the charger.
Note:
Note: The function and the extension must be programmed in the PBX to be able to
redirect calls.
1. Select In charger.
2. Select Redirect.
Switch off While Charging
When the cordless telephone is placed in the charger it can be switched off while it is charging.
When it is removed from the charger it will switch on again.
1. Select In charger.
2. Select Switch off.
Deactivate the Charging Mode
1. Select In charger.
2. Select No action.
3. Press Select to save the setting.
System
Only available systems are displayed. It is possible to switch between the systems if they are
configured in the Portable Device Manager (PDM) or Avaya In-Building Wireless Server
(AIWS), see Installation and Administration Manual, DECT R4.
Change System
1. Select System.
2. Select Change System.
3. Select Automatic or a specific system. If the telephone is set to Automatic it selects a
system according to the priority list, see Priority
on page 56.