Filter
Top Products
Interface Control
Issue 5 April 2010 95
a. During normal DHCP processing, press the * key while “* to program“ displays during
the DHCP process.
or
b. While the telephone is on-hook and idle, press the following sequence of keys on the
faceplate of the telephone:
Mute 2 3 3 7 # (Mute A D D R #)
Note:
Note: Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons.
The telephone displays:
where nnn.nnn.nnn.nnn is the current IP address system value of the telephone.
2. Enter the telephone’s IP address followed by the # button.
The telephone displays:
where nnn.nnn.nnn.nnn is the current system value of the media server/gatekeeper IP
address.
3. Enter the Gatekeeper IP address followed by the # button.
The telephone displays:
where nnn.nnn.nnn.nnn is the current system value of the gateway/router IP address.
4. Enter the Gateway router IP address followed by the # button.
The telephone displays:
where nnn.nnn.nnn.nnn is the current system value of the IP netmask.
Phone=nnn.nnn.nnn.nnn
New=_
CallSv=nnn.nnn.nnn.nnn
New=_
Router=nnn.nnn.nnn.nnn
New=_
Mask=nnn.nnn.nnn.nnn
New=_