AT&T TT01 Bluetooth Headset User Manual


 
ENGLISH
3
TT01 ELECTRICAL DIAGRAM
ENGLISH
4
PAIRING NOKIA 6310, 6310i, 6650, 7600, 8910
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your
TT01. Once this is done, connection between your telephone and your hands-free kit will take place automatically as soon
as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is established.
IMPORTANT : The hands free kit is only operative when the car ignition is on (IGN)
Procedure
:
Switch on the telephone; turn on the ignition, the blue led shows that the hands free kit is supplied. Perform the following
sequence on the telephone. The first time you will hear the instruction ”PLEASE PAIR DEVICE”, otherwise reset the TT01
by pressing and holding the red/green buttons at the same time.
Access the Menu and scroll
to «Bluetooth®», press «Select». Find «On» to activate Bluetooth®.
To «Search for audio accessories», press Select.
The display reads «Searching for devices». Please wait.
The display reads «TT01 CK3.xx», press «Select» to make the connection.
The display reads, «Enter password for TT01 CK3.xx», enter 1234 then «Select».
From now on, when you press the keys on your phone, you should hear the sound coming through your vehicle
loudspeakers.
For more information, consult your Nokia phone user's guide.
COMMUNICATING NOKIA
The TT01’s green and red buttons are the main devices to make and receive calls.
Answering calls
:
Press the TT01’s green button to accept the call.
Press the TT01’s red button to hang up or if you wish to reject the call.
Make a call in TOUCH & TALK mode:
Briefly press the green button, wait for the tone, then say the name of the person you want to call.
E.g.: press green button, [beep], John..
Press the red button to hang up.
Please refer to “MEMORIZATION of VOICE TAGS” section for name voice recognition.
Making a call manually:
Use the phone keypad to dial the number. Your call will be connected automatically, in hands-free mode.
Managing Dual Calls
:
A warning tone will alert you if someone is trying to get through while you are engaged on another phone call.
Press green button once to communicate with a new caller.
Press green button once to return to your first caller.
To end the present communication, press red button once.
After getting into your car and turning of the ignition key, your telephone
should ask you
whether you wish to establish the Bluetooth® connection with
TT01
. It is possible to disable
this function. To do that, go into the Menu and select «Bluetooth®» using the up and down
buttons.
Then, scroll until «view paired devices», press «Select».
«TT01 CK3.xx» appears, click on “Options».
Scroll until «Request conn. authorisation», enter «Select».