Filter
Top Products
Getting started
6
4. Route the telephone line cord through
the slot as shown below and plug the
other end of the telephone line cord
into a telephone wall jack. To mount
the telephone on the wall, position
the mounting holes A and B over
the telephone outlet mounting studs.
Slide the bracket down firmly so the
telephone is held securely on the
telephone outlet mounting studs.
5. Place the handset back on the
telephone base.
Installation options
Tabletop installation
To return the bracket from the wall installation to tabletop use, follow the
instructions below.
2.
Lift the handset and place it aside. On the telephone base, pull out the
handset tab and rotate it 180 degrees. Replace the handset tab back to the
grooves until it clicks into position.
1. Remove the telephone base from the wall mounting plate. Unplug the
telephone line cord from the telephone wall jack and remove the cord from
the slots under the telephone base.
DSL filter
(not included)
A
B